PIC Development Board

Introduction

The FED PIC Development Board supports 40 pin PIC MCU's in the 16F, 16C, 18C and 18F series, it includes an In Circuit Serial Programmer. Click Here for a larger picture.

Development Board Capabilities

The FED development/evaluation board for 40 pin devices has the following features: ·

  • Supports all 40 pin 16 and 18 series PICmicro® MCU's (examples use PIC16F877).
  • Will run the FED BASIC interpreter and compiler system (supplied with CD-ROM)
  • Has on board 5V, 1A, regulator
  • 2 Serial interfaces for standard 3 wire serial communications connected to PIC serial interface and CCP pins
     
  • Supports 8 pin EEPROM/RAM devices with IIC interface (used to run FED BASIC)
  • 20MHz crystal oscillator
  • 32 I/O pins (all except E2) available on standard IDC connectors
  • Connector for LCD module - 1:1 pin out including brightness control
  • Key pad connector, resistors and diodes for 4x4 hex keypad
  • Full In Circuit Serial programmer - connect to the PC and program hex files direct to any of the 40 pin PIC's in the PIC16CXXX, PIC16FXXX, PIC18FXXX and PIC18CXXX series.
  • 4 LED's
  • LCD, Hex keypad and LED's all connect to PORTD/PORTE leaving all other ports free for other I/O functions
  • Available in a wide range of options

Download Manual

Download the Development Board Manual, (right click and use Save Target As menu option to save to disk) includes circuit diagrams and examples

Pricing & Ordering information

Kit with all parts EXCEPT for the PIC £35.00

Ready Built and Tested excluding the PIC device £45.00

Development Board PCB Double Sided, Fibreglass, Silk screen printed etc. - £14.00

CD ROM including manuals, examples, programmer application and FED PIC BASIC application and hex files £5.00,

24LC65 required to run FED PICmicro® MCU BASIC £2.50,

PIC16F877-20 chip £6.00,

PIC18F452 (Up to 40MHz) flash reprogrammable chip £8.00,

How To Order

Send Email Email us for further Questions